01B
A1
10
3B-4
3/8in. (10mm)
Socket Wrench
(Not lncluded)
Step 4 Secure the TV onto the Arm Assembly/Wall Plate [01B]
Install wall plate using lag screws
[A1]. Tighten the lag screws [A1]
only until they are pulled firmly
against the arm assembly/ wall
plate [01B]. DO NOT over-tight-
en the lag screws [A1].
4-1.
Remove the preassembled bolt [S1] from the faceplate [01A] using the
phillips screwdriver.
4-2. Hang the TV to the arm assembly/wall plate, making sure the upper bolt
hangs on the hook on the arm assembly/wall plate.
4-3. Tighten the bolt [S1] to secure the TV to the arm assembly/wall plate.
UP
You may need assistance
with this step.
①
③
②
S1
S1
Phillips
Screwdriver
(Not lncluded)
1/2 in.(13mm)
Socket Wrench
(Not lncluded)
Tighten
01B
HEAVY!
You may need
assistance with this step.
