Option D
For cable interference or inset holes, use
spacers to create extre space between the
TV and faceplate(or faceplate with extender)
)bracket.
05
D2/D4/D6
06
B1/B2
04
C1/C2
05
3A-1
Use a stud finder(not included) to
locate wood studs or use an awl (not
included) to verify the edges. Mark the
edge and center locations.
Awl
(Not lncluded)
Alternate Spacer Setups
Step 3 Attach the Arm Assembly/Wall Plate [03] to Wall
WARNING:
Step 3A Wood Stud Option
X
● Any material covering the wall must not exceed 5/8 in. (16 mm)
● Nominal wood stud size: common 2 x 4 in. (51 x 102 mm) minimum 1½ x
3½ in. (38 x 89 mm)
● Stud center must be verified
●Ensure the arm assembly/wall plate [03] is securely fastened to
the wall before continuing to the next step.
●DONOT USE ANCHOR [A2] FOR THIS STEP!
●Avoid potential personal injury or property damage! DO NOT over-tighten the
lag screws [A1]. Tighten the lag screws [A1] only until the they are pulled firmly
against the arm assembly/wall plate [03].
For wood stud installation, follow STEP 2A
For concrete installation, follow STEP 2B
07
