Wall fixing
- if in doubt seek professional advice
Wood
If fixing to wood
make sure that it
isn’t chipboard as
screws can easily pull
away from the core
structure
Brick or Masonry
Use an appropriate
wall plug provided you
are sure your wall is
sound
Cavity wall
Special toggle
wall plugs are
needed. Seek
expert advice
1. See fig
.
1 below. Screw one of the brackets on to the back of the unit in the middle, using the short
screws provided. Make sure the TOP OF THE BRACKET IS BELOW the top of the
. Position the
against the wall where you want it to go, place the second bracket onto the wall below the one
fixed to the
and mark where the holes come on the wall. Move the
away from the wall.
2. Attach the wall bracket
using screws suitable for your type of wall
, see
Wall fixings
above.
3. Place the
back against the wall so the two brackets match up and tie them together with
the plastic strap provided Fig. 4. The plates need not match exactly, but the plastic tie must go through
each plate. Close the strap, but do not over tighten it. See diagrams below.
3. Assembly complete.
unit
unit
unit
unit
unit
