background image

ercol

Pre-assembly preparation

Please ensure instructions are read in full before attempting to assemble this product

Necessary Tools

This item is

HEAVY

Please check the pack contents before attempting to assemble this product. A full checklist of components

is given in this leaflet. If any components are missing, please contact the retailer from whom you bought 

this product.

This product is 

HEAVY

, it should be assembled as near as possible to the point of use. 

TAKE CARE

WHEN LIFTING

to avoid personal injury and (or) damage to the product. 

This product takes approximately 

30 MINUTES

to assemble with 

2 PEOPLE

.

The fittings pack contains 

SMALL ITEMS

which should be

KEPT AWAY FROM YOUNG 

CHILDREN.  

teramo 2610 Dressing Table

Thank you for purchasing this teramo dressing table. Please read the instructions carefully before use to ensure safe 

and satisfactory operation of this product. Installation shall be carried out exactly according to the manufacturers 
instructions, otherwise a safety risk can occur if incorrectly installed.

WARNING: In order to prevent overturning this product must be used with the wall attachment device provided.

Summary of Contents for Teramo 2610








Reviews: