5. Locate the centre cross rail into the brackets
5
A
1
2
3
4
4.
In order to assist in easily winding the nut on to the bolt, please put the nut in place - see sketch - and lightly press it
against the bolt using one of your fingers as shown in the sketch.
With your other, free hand start turning the nut clockwise, using the spanner supplied with the fittings.
As soon as the nut is fully wound on to the bolt, remove your finger but continue winding the nut with the spanner until
it is tight.
Repeat same assembly operation for footboard.
Page 4 of 6