background image

YNG TAL 14 / ESMT4 D: 09.07.2015 / RN 002

Thank you for purchasing this Shalstone 4 drawer chest. Please read the instructions carefully before use  to 
ensure safe and satisfactory operation of this product

The fıttings pack contains 

SMALL ITEMS

which should be 

KEPT AWAY FROM YOUNG 

CHILDREN.

This product is

HEAVY

it should be assembled as near as possible to the point of use

.

TAKE CARE 

WHEN LIFTING 

to avoid personal injury and (or) damage to the product.

Please check the pack contents before attempting to assemle this product. A full checklist of components is given 
in this leaflet. If any components are missing, please contact the retailer from whom you bought this product.

Pre-assembly preparation 

Please ensure instructions are read in full before attempting to assemble  this product. 

This item is

HEAVY

Shalstone 4 drawer chest

Stock numbers  80311506

Necessary 

Tools

This product is product takes approximately 

20 MINUTES

TO 

assemble with

2 PEOPLE

.

Page 1 of 4

Summary of Contents for Shalstone 80311506

Page 1: ...RE WHEN LIFTING to avoid personal injury and or damage to the product Please check the pack contents before attempting to assemle this product A full checklist of components is given in this leaflet If any components are missing please contact the retailer from whom you bought this product Pre assembly preparation Please ensure instructions are read in full before attempting to assemble this produ...

Page 2: ...rick or Masonry Use an appropriate wall plug provided you are sure your wall is sound Cavity wall Special toggle wall plugas are needed Seek expert advice 1 Screw the textile strap on to the back edge of top panel of the item at centre point using short screw provided Position the item against the wall where you want it to go 2 Attach the textile strap using screws suitable for your type of wall s...

Page 3: ...ding level use the wedges B provided Push a wedge under the corner of your cabinet until it becomes level fig 4 then snap it off as shown in fig 5 Finally tap any of the wedge still protruding out from under the furniture fig 6 A C fig 4 fig 5 fig 6 Page 3 of 4 ...

Page 4: ...g abrasive compounds acidic or caustic reagents and any bleaches containing oxidising reagents should be avoided as prolonged use may damage the lacquer surface Wipe up spills immediately If sticky marks occur on the surface they can be removed with a dilute solution of warm soapy water The offending area should be rubbed lightly and then completely dried immediately afterwards before replacing an...

Reviews: