background image

Salina bed

Thank you for purchasing this salina bed. Please read the instructions carefully before use to ensure safe 
and satisfactory operation of this product.

Pre-assembly preparation

Please ensure instructions are read in full before attempting to assemble this product

Necessary Tools

This item is

HEAVY

Please check the pack contents before attempting to assemble this product. A full checklist of components

is given in this leaflet. If any components are missing, please contact the retailer from whom you bought 

this product.

This product is 

HEAVY

, it should be assembled as near as possible to the point of use. 

TAKE CARE

WHEN LIFTING

to avoid personal injury and (or) damage to the product. 

This product takes approximately 

40 MINUTES

to assemble with 

2 PEOPLE

.

The fittings pack contains 

SMALL ITEMS

which should be

KEPT AWAY FROM YOUNG 

CHILDREN.  

3890/1double/kingsize beds

Ref: 1819/3890,3891

Summary of Contents for Salina 3890

Page 1: ...attempting to assemble this product A full checklist of components is given in this leaflet If any components are missing please contact the retailer from whom you bought this product This product is HEAVY it should be assembled as near as possible to the point of use TAKE CARE WHEN LIFTING to avoid personal injury and or damage to the product This product takes approximately 40 MINUTES to assembl...

Page 2: ... 1 C Side rails x 2 K Spanner x 1 D Centre rail x 1 L Central brackets x 2 E Slats double bed x 32 Slats king size x 34 M Washers x 2 F Ends for slats double x 64 Ends for slats king size x 68 N Nuts and bolts x 2 each H Threads x 8 O 20mm Screws x 12 x 8 J Dowel x 8 C B C A D F ...

Page 3: ...the holes in the side rails C are facing upwards AND you have the Left and Right rails see page 2 on the corret sides locate these side rails onto the protruding threads on the headboard and foot board As you do this slide a half moon washer onto the thread when it comes through into the circular hole in the side of the rail then screw on one of the 8 nuts FINGER TIGHT ONLY Repeat with the other 3...

Page 4: ...t in place using the 2 x 40mm bolts and the 2 washers and nuts 5 Push a plastic cap onto each end of a slat and with the peg facing downwards push the slat into the pre drilled holes as shown below Repeat for all the slats Once the centre rail is in place tighten all four corners so they are secured PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE Ercol Furniture Ltd Summerleys Road Princes Ris...

Reviews: