A
12 x M6 35mm bolts
B
1 x allen key
C
8
x brass shelf supports
D
1
x Zinc and gold bracket
E
2
x 16 pan head screw
Fittings and parts checklist
Step by step assembly instructions
1. Lay the top of the unit on the floor. Making sure the shelf pin holes are facing inwards, use the
allen key provided to screw 3 of the bolts into each of the legs at both ends FINGER TIGHT
ONLY. When all 12 are in place tighten fully. Turn the shelving unit upright.
2. Push the shelf pins into the legs at desired heights and place the two shelves onto them.
