Fix the first leg assembly to the under frame with 6 of the
bolts provided. Tighten all the way with the allen key.
The 60mm bolts are to be used on the inside face of leg
assemblies and the closet to the middle.
The 40mm bolts are to be used everywhere else.
Offer the rails up to the leg assembly. With the table
upside down, the rails have the cam fitting facing the
ceiling.
When the rails are in place tighten the cams with the
allen key clockwise. This will pull the rails into the leg and
make them secure.
Offer the second leg assembly to the other end of the
rail. This time you will need to tighten the cams on the
rails first. When doing so alternate tightening the top and
bottom rail by doing half a turn on each.
Once they are both tight you may attach the leg assembly
to the table top with the remaining 6 bolts.
The table is now secure and may be turned upright.
40mm bolt
40mm bolt
60mm bolt
