background image

HARTWELL 2 DOOR WARDROBE

Assembly instructions 

Produced

  in China for Next Retail Ltd.

BEFORE  YOU START

not supplied

PH2

not supplied

To View our full furniture range please visit www.next.co.uk

You can write to us at

Home service technicians

If you have a fault with your product please contact our

customer service team on 0333 777 8999. If you have had the

product for 28 days or less you may be offered a replacement,

refund or for a fully trained home service technician to visit you

home to assess the fault and repair the product where possible

If you have had the product for more than 28 days we will send

an independant home service technician to review and repair

the product where possible and recommend further action.

Missing parts

If you are missing any fixtures and fittings for your product

please contact our customer service team on 0333 777 8999

and they will be happy to arrange for a replacement to be sent

to you free of charge.

Tools required

Time to assemble wall fixing

Number of people required to assemble

Two persons are required to assemble this item.

Don’ts

Do not drag or pull your furniture.

Do not use silicone based furniture polish. Silicone in furniture 

polishes can break down the finish.

Never allow any kind of liquid to remain on your furniture.

Absorption can cause wood to warp or finishes to de-laminate.

Do not place hot items (e.g. hot drinks) directly on to the wood 

surface. Please make sure you use a placement or coaster.

Warnings

We suggest you retain these instructions for future reference.

Keep fittings out of children’s reach and keep children well 

away from the construction area.

This product should only be used on firm, level ground.

Please periodically check all fittings and re-tighten as 

necessary.

Please do not sit or stand on your furniture.

Avoid exposing the furniture to excessive heat or direct 

sunlight as this can cause deterioration of the colour.

Unwrap all packaging materials and place the components 

on top of the carton box or on a clean floor to protect it from 

damage.

Do’s

We suggest you spend a short time reading through this leaflet 

before you start.

When you are ready to start, make sure that you have the 

right tools and plenty of space.

Unwrap all packaging materials and place the components 

on a clean surface to protect it from damage.

We recommend that the packaging is used to protect the 

surfaces during assembly.

Carefully check that you have all the parts before beginning 

assembly

Due to the size of the product we recommend that it is 

assembled in the room intended for use.

Ensure the product is fully assembled as illustrated and all 

fixings are fully tightened before use.

Wipe occasionally with a soft cloth slightly dampened with 

water. Then buff with a dry clean soft cloth.

Wood will mellow and change colour over time, we recommend 

that ornaments and items placed on the surface are moved 

regularly for the first few months to prevent uneven mellowing.

Home Customer Services

Next Retail Ltd,

Desford Road,

Leicester,

LE19 4AT

446-368-018

446-368-018

Summary of Contents for HARTWELL 2 DOOR WARDROBE









Reviews: