ercol
Wall fixing instructions
Thank you for purchasing this ercol product.
Please read the instructions carefully before use to ensure safe and satisfactory operation of this product.
Installation shall be carried out exactly according to the manufacturer’s instructions, otherwise a safety risk can
occur if incorrectly installed.
1. See Fig. 1. Screw one of the brackets on to the back of the chest in the middle, using the short screws
provided. Make sure the top of the bracket is below the top of the chest. Position the chest against the wall
where you want it to go, place the second bracket onto the wall below the one fixed to chest and mark where
the holes come on the wall. Move the chest away from the wall.
2.
3. Place the chest back against the wall so the two brackets match up and tie them together with the plastic strap
provided. The plates need not match exactly, but the plastic tie must go through each plate. Close the strap,
but do not over tighten it. See Fig. 3.
B
PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE
Ercol Furniture Ltd, Summerleys Road, Princes Risborough, Buckinghamshire. HP27 9PX www.ercol.com
WARNING: In order to prevent overturning this product must be used with the wall attachment device provided.
Fittings and parts checklist
Wall fixing
- if in doubt seek professional advice
Attach the wall bracket
using screws suitable for your type of wall
, see
Wall fixings
above.
4. If the chest is not level on your floor use the wedges provided, and snap them off so that they
do no Protrude out from the cabinet’s legs , you can also snap them lengthways if desired.
