EG_GenLoc354e_1040Q_UG_002_UK
Page 60 / 69
Descriptions and non-contractual illustrations in this document are given as an indication only.
ERCOGENER reserves the right to make any modifications.
Dct_427_02
6.9 Reading a current position given by the GNSS
The modem contains the EGM standard library (see the documents "EG_EGM_CL_xxx_yy" of
ERCOGENER); in this case, the reading of a GNSS position can be done with the command
AT+GPSPOS
.
This command allows to get the information received of the current position. After powering ON the modem,
an acquisition time is necessary (around 45 seconds).
The response is in the following format and the table shows examples of responses:
+GPSPOS:<fix>,<time>,<date>,<latitude>,<longitude>,<altitude>,<hdop>,<speed>,<direction>,<nbsat
>
<
fix
>
0 invalid fix
1 2D fix
2 3D fix
-1 impossible to define a position
<time>
: hhmmss.zz
example: 083205.00 -> 8 hours 32 minutes 05 seconds et 00 hundredth of a second in UTC
<date>
: ddmmyy
example: 180406 -> 18 April 2006
<latitude>
: ddmm.mmmmm(N/S)
dd (degree) 00 to 90
mm.mmmmm (minute) 00,00000 to 59,99999
N/S North or South
example: 4716.81310N -> latitude 47 degrees 16,81310 minutes North
<longitude>
: dddmm.mmmmm(E/W)
ddd (degree) 00 to 180
mm.mmmmm (minute) 00,00000 to 59,99999
E/W East or West
example: 00003.51202W -> longitude 0 degree 0 3,51202 minutes West
<altitude>
: mmmm.m in meter
<hdop>
: mmm.mm horizontal dilution position in meters
<speed>
: ssss.s ground speed in km/h
<cap>
: dddmm.mmmm
ddd (degree) 000 to 360
mm.mmmm (minute) 00,0000 to 59,9999
<nbre sat>
: nn number of satellites seen
Summary of Contents for GenLoc 354e
Page 69: ...DECLARATION OF CONFORMITY ...
