background image

2

3000061732

English

Follow the luminaire installation 

instructions.

  Read the instructions carefully  

 

    before installation and commis- 

     sioning!

  Leave the instructions for users/ 

 

    customers for future reference!

  Our updated product documen- 

 

    tation can be accessed at  

     www.erco.com/download.

General safety information

 

 Warning! 

   

Danger of electric shock!

The DALI signal is not transmitted with 

safety extra-low voltage (SELV)! Before 

establishing the electrical connection, 

ensure that the DALI lines are discon-

nected and secured against being 

switched on again. All cables, materials 

and devices used must be suitable for 

mains voltage.

 

 

Warning! 

   

Fire hazard!

The gateway must not be connected 

directly to the mains voltage. This could 

start a fire. It would definitely damage 

the gateway and possibly other DALI 

devices.

Attention!

When installing, always observe the 

national installation and accident pre-

vention regulations.

Preconditions

- The DALI Casambi Gateway functions 

only in Casambi Evolution networks. 

You can update Classic networks in the 

Casambi app to an Evolution network.

- To set up and operate the gateway you 

need the app provided by Casambi as 

well as a DALI control with integrated 

power supply for the DALI bus. According 

to the installation location, you need 

a suitable mounting enclosure and, if 

necessary, a strain relief.

Function

- The DALI Casambi Gateway converts 

wired DALI signals into Casambi Blue-

tooth wireless signals. Luminaires or 

sensors/switches with Casambi can thus 

be integrated into DALI networks. They 

are shown in the DALI control as DALI 

devices with an address. The gateway 

does not need a DALI address for itself. 

- A broadcast command to all luminaires 

is possible. In this case the gateway 

requires an address and up to 249 lumi-

naires can be reached.

- With Casambi Bluetooth you can use 

all luminaires and devices, they do not 

have to be DALI devices or luminaires. 

You can set the addressability of a lumi-

naire for DALI commands and the com-

mand hierarchy in the Casambi app.

- The gateway supports Device Type 6  

(dimming) and 8 (colour control) as 

well as Casambi sensors and switches/

push-buttons. 

- The maximum number of individu-

ally controllable luminaires / devices 

depends on the DALI system, i.e. 64 

luminaires / devices; with DALI Broad-

cast you can address up to 249 lumi-

naires simultaneously.

- General information on DALI is available 

at www.digitalilluminationinterface.org.

- The DALI Casambi Gateway complies 

with Directive 2014/53/EU. 

Radio operation is implemented on 

frequency bands 2402 – 2480 MHz with 

maximum transmission power of 4 dBm. 

See the Casambi website  

(www.casambi.com) for the complete 

EU declaration of conformity text

Intended use

- The gateway is only suitable for dry 

indoor areas. 

- In outdoor areas, install the gateway 

in a housing with the required protec-

tion rating.

 

Restrictions

For installation within arm's reach, the 

gateway must be installed in a suitable 

housing.

Mounting location

- The gateway must not be completely 

covered with metal. Metallic environ-

ments weaken the Bluetooth wireless 

signal or suppress it completely. Installa-

tion in sub-distribution units or similar 

is therefore not recommended. 

- The distance between the gateway 

and luminaire should not exceed the 

distance specified in the drawing. Spa-

tial conditions influence the range; it 

is advisable to test connectivity of the 

network on location.

- You can install the gateway in a suit-

able surface-mounted or recessed hous-

ing, for example a switch box. Outside 

of arm's reach, installation without a 

housing is also possible.

Commissioning/configuration

 

 

Warning! 

   

Fire hazard!

The gateway must not be connected 

directly to the mains voltage. This could 

start a fire. It would definitely damage 

the gateway and possibly also other 

DALI devices.

- The two connection pairs DA1 and 

DA2 are connected in parallel and can 

be used for through-wiring.

1. Connect the gateway to the DALI bus.

2. Set up the Casambi network with 

the gateway and the desired Casambi 

devices/luminaires.

3. Settings: 

- Scope: Define luminaires/devices that 

are addressed via DALI.

- Define the prioritisation (DALI - Casambi 

command hierarchy DALI - Casambi)

4. Set up the devices/luminaires in the 

DALI system.

Cleaning 

Always clean carefully using a soft 

cloth and a commercially available, 

ph-neutral, alcohol-free, non-abrasive 

cleaning agent.

Disposal 

 

According to the EU directive  

 

WEEE (Waste Electrical and Electro-

nic Equipment) the device must not be 

disposed of via unsorted waste. It must 

be conveyed to the local facility for the 

disposal or recycling of electronic  

products.

Reviews: