EG_GenPro78e_1003_UG_007_UK
Page 24 / 41
Description and non-contractual illustrations in this document are given as an indication only.
ERCO & GENER reserves the right to make any modifications.
5.9 Powering down the unit
There is no specific AT command to be transmitted to the
GenPro 18e
modem before removing the power.
5.10 Updating the modem software
So as to be able to benefit from the latest functions of the
GenPro 18e
, a procedure is used which will
upgrade the software in the modem.
This consists of downloading the software into the internal Flash memory via the RS232 serial link available
on the 15-pin Sub HD connector.
Please refer to the software update procedure document for a detailed description of this procedure.