13
47. Select
PROG.MIX4
from the radio menu.
Set the mix for
ELEV
to
AUX2
. Make
sure that the rates are both at +100% and
that the switch is set to
ON
. There should
be no offset for this mix.
48. On
LOW RATES
the Elevons should
move
3/4"
in both directions. The Thrust
Vector units should move in the same
direction as the Elevons.
NOTE
: When the Elevons are in their neutral
position the Thrust Vector Nozzles should be
in their neutral position also. If they are not
you must adjust them mechanically by
screwing or unscrewing the ball link
connector to achieve a neutral position.
49. On
HIGH RATES
the Elevons should
move
1-1/2"
in both directions. The
Thrust Vector units should move in the
same direction as the Elevons.
50. On
LOW RATES
the Canards should
move
5/8"
in both directions. When the
Elevon moves UP the Leading edge of
the Canard should move UP.
Summary of Contents for ERC1500 EUROFIGHTER
Page 1: ...1...
