Erbe VIO C, User Manual

Page: 18 / 118

18
4.3 Connecting and Setting up the Product
Connect the footswitch cable to the unit by aligning the arrows
that are on the footswitch connector towards the top of the unit
and pushing it into the footswitch socket of the unit until secure.
Set up the footswitch on a level floor where it cannot tip over.
The cable must not be suspended above the floor (danger of tip-
ping) but laid along the floor.
To disconnect the footswitch cable from the unit, pull back the
locking sleeve of the footswitch connector and pull from the
socket.
4.4 Conducting a Performance Test
Before each use, check/verify that the footswitch functions
properly.
4.5 Footswitch Pedals and their Function
Footswitch No. 20188-102:
• Blue pedal: activates coagulation
Footswitch No. 20189-107:
• Yellow pedal: activates cutting
• Blue pedal: activates coagulation
5
Cleaning and Disinfection
5.1 Safety Instructions
Erbe recommends wiping or spray disinfection with an appropri-
ate disinfectant. Comply with the disinfectant manufacturer's
stipulations as to its suitability and concentration.
OBJ_DOKU-188594-006.fm Seite 18 Donnerstag, 22. November 2018 8:26 08