Inserting
1. Open the release lever for tool socket (3) and hold it in position.
2. Insert the saw blade into the tool socket (10) fully to the stop. Make sure the saw
teeth point to the cutting direction.
3. Release the lever for tool socket (4) and make sure the saw blade is firmly clamped
in the tool socket (10). Check proper locking by pulling the saw blade.
NOTE:
Choose the correct blade according to the desired operation.
Before use, please always ensure the blade is properly attached and free
of damage.
Removing (Fig. A)
1. Open the release lever for tool socket (3) and hold it in position.
2. Remove the saw blade.
3. Release the lever for tool socket (4).
Use
Intended use
This product is intended for cutting wood and similar material e.g. MDF and chipboard,
plastic and metal using the respective saw blade. The product must be used with the
guide plate laying flat against the workpiece. It may not be used as a stationary product
on a work bench.
The product must not be used on masonry and materials that are harmful to health.
Before you start
01
Protection
Controls
01
Guide plate adjustment (Fig. D and E)
WARNING!
Always switch the product off and disconnect it from power
supply before making any adjustments!
Adjust the position of guide plate according to the saw blade length and workpiece
thickness; always ensure that the saw blade extends beyond the workpiece throughout
the stroke. (Fig. E)
1. Push the guide plate adjustment button (2) and hold it in position. (Fig. D, step 1)
2. Slide the guide plate (1) to the desired position (Fig. D, step 2).
3. Release the guide plate adjustment button (2) and pull the guide plate (1) to make
sure it has been fixed in position.
19
18
