Erbauer ERB401SDR, Original Instructions Manual

Page: 13 / 20

360W 1/2 SHEET SANDER 360W 1/2 SHEET SANDER
OPERATING INSTRUCTIONS
Note: Before using the tool, read the instruction
book carefully.
Intended Use
The machine is intended for dry sanding of wood,
plastic, filler and coated surfaces.
1. ON /Off SWITCH
Depress to start and release to stop your tool.
2. SWITCH LOCK-ON BUTTON
Depress on/off switch (1) then lock-on button (2) (See
Fig.1), release on/off switch first and lock-on button
second. Your switch is now locked on for continuous
use. To switch off your sander just depress and
release the on/off switch.
3. VARIABLE SPEED CONTROL
Adjust the variable speed control(3) to increase or
decrease the speed according to the material and
sanding sheet specification to be used (also possible
during no load operation) (See Fig.1). See the table
below for general guidance on speed selection. Avoid
prolonged use at very low speed as this may damage
your sander’s motor.
Sanding
work
Grain Speed
setting(opm)
Coarse
sanding
Precision
sanding
Sanding
down
varnishes
180 400 8700~11000
Stripping
paint
40 120 9800~11000
Touching
up
paintwork
120 120 7600~10000
Sanding
wood
60 240 7600~11000
Machining
veneer
180 400 8700~11000
Sanding
aluminium
80 240 7600~11000
fig. 1
2
1 +
-
3