Erbauer ERB371GRD, Original Instructions Manual, Page: 15 / 24

2300W 230MM ANGLE GRINDER
OPERATING INSTRUCTIONS
Note: Before using the tool, read the instruction
book carefully.
Intended Use
The machine is intended for cutting, roughing and
brushing metal and stone materials without using
water. For cutting metal, a special protection guard
for cutting ( accessory) must be used.
1. LOCK-OFF SWITCH(See Fig. 1)
Your switch is locked off to prevent accidental starting.
To switch on your tool, push the safety switch lever
(B) forward and depress on/off switch (A) fully. Now
your tool is switch on. To switch off your tool, just
release the On/Off switch.
2. HAND GRIP AREAS
Always hold your angle grinder firmly with both hands
when operating. (See Fig. 2)
3. ANTI-VIBRATION AUXILIARY HANDLE
This front handle incorporates a flexible vibration
absorbing mounting between the bolt and handle
grip to reduce vibration and increase comfort.
Note: The handle fixing to the gear case is flexible
and not a rigid clamp. You have the option of three
working positions to provide the safest and most
comfortable control of your angle grinder (See Fig. 3).
Side position for grinding and top position for cutting.
The handle is screwed clockwise into the gear case
hole (See Fig. 2). Always use the auxiliary handle.
4. SPINDLE LOCK BUTTON
Must only be used when changing a disc. Never
press when the disc is rotating!
5. DISC FITTING
The inner flange (5) is located over the spindle (6) and
on the two spindle flats. Locate the disc onto the
inner flange and then the outer flange (7) is screwed
onto the spindle. Press the spindle lock button (4) and
rotate the spindle until it locks, then firmly tighten the
outer flange using your pin spanner to clamp the disc
(See Fig.4) . The pins on your pin spanner locate in
the holes on the outer flange. Check the disc rotates
freely and is securely clamped. Make a no load test
run for 30 seconds to check disc vibration and disc
run out. To remove a disc, reverse these instructions.
Fig. 1
Fig. 2
Fig. 3
A
B
15
16
17
A
B
15
16
17
A
B
15
16
17