6kg SDS Plus Rotary Hammer Drill
or pipe work in the path of the bit.
• Always operate your drill using both the handle
and the front handle.
• Never change the operating mode whilst the
drill is running.
• When using the product in the hammer only
mode, or when chiseling masonry, make sure that
you wear safety glasses and protective gloves.
• Do not apply excessive pressure to the tool
when chiseling. Excessive force does not speed
up the work.
ENVIRONMENTAL PROTECTION
Waste electrical products should not be
disposed of with household waste. Please
recycle where facilities exist. Check with
your Local Authority or retailer for recycling
advice.
PLUG REPLACEMENT
The fuse in the main plug of your power tool
should always be replaced with one of identical
rating.
Check the voltage given on your power tool
matches the supply voltage.
The power tool is supplied with a fitted plug,
however if you should need to fit a new plug
follows the instruction below.
IMPORTANT
The wire in the mains lead are coloured in
accordance with the following code:
Blue ---Neutral
Brown ---Live
The wire that is coloured blue must be connected
to the terminal that is marked with the letter
N
.
The wire that is coloured brown must be
connected to the terminal that is marked with the
letter
L
.
A 13AMP (BS1363 or BS1363/A) plug must be
used and a 13 AMP fuse must be fitted.
