Erbauer ERB2002, Manual

Page: 5 / 19

230mm Angle Grinder
d. Remove any adjusting key or wrench before turning the power tool
on.
A wrench or a key left attached to a rotating part of the power tool may result
in personal injury.
e. Do not overreach. Keep proper footing and balance at all times.
This
enables better control of the power tool in unexpected situations.
f. Dress properly. Do not wear loose clothing or jewellery. Keep your
hair, clothing and gloves away from moving parts.
Loose clothes, jewel-
lery or long hair can be caught in moving parts.
g. If devices are provided for the connection of dust extraction and col-
lection facilities, ensure these are connected and properly used.
Use of
these devices can reduce dust related hazards.
4. Power tool use and care
a. Do not force the power tool. Use the correct power tool for your ap-
plication.
The correct power tool will do the job better and safer at the rate for
which it was designed.
b. Do not use the power tool if the switch does not turn it on and off.
Any power tool that cannot be controlled with the switch is dangerous and must
be repaired.
c. Disconnect the plug from the power source before making any ad-
justments, changing accessories, or storing power tools.
Such preven-
tive safety measures reduce the risk of starting the power tool accidentally.
d. Store idle power tools out of the reach of children and do not allow
persons unfamiliar with the power tool or these instructions to operate
the power tool.
Power tools are dangerous in the hands of untrained users.
e. Maintain power tools. Check for misalignment or binding of moving
parts, breakage of parts and any other condition that may affect the
power tools operation. If damaged, have the power tool repaired be-
fore use.
Many accidents are caused by poorly maintained power tools.
f. Keep cutting tools sharp and clean.
Properly maintained cutting tools
with sharp cutting edges are less likely to bind and are easier to control.
g. Use the power tool, accessories and tool bits etc., in accordance
with these instructions and in the manner intended for the particular
type of power tool, taking into account the working conditions and the
work to be performed.
Use of the power tool for operations different from
intended could result in a hazardous situation.
h.Never use cutting discs for rough grinding. Do not exert any lateral
pressure on cutting disc.
i. Do not clamp the machine in a vice.
5. Service
a. Have your power tool serviced by a qualified repair person using only
Safety Instructions identical replacement parts.
This will ensure that the
safety of the power tool is maintained.