6Kg SDS HAMMER DRILL
A
A
6. Hammer drill function (See Fig 5-6)
1) For drilling concrete, masonry etc, press the
lock button (A) and rotate the selector switch to
make sign “ “ point to the triangle. (See Fig 5)
Note:
You must press the selector switch lock
button before adjusting the selector switch. If
the selector switch cannot go into the required
position, switch on your hammer a little, then
adjust the selector switch again.
2) Turn the hammer or drilling action selector
switch pointing to the hammer action “ “
position. (See Fig 6)
3) You are now set up for hammer drilling into
masonry.
7. Drilling function(See Fig 7-8)
1) Press the lock button (A) and rotate the selector
switch to make sign “ “ point to the triangle.
(See Fig 7)
2) Turn the hammer or drilling action selector
switch pointing to the drilling action “ “ position.
(See Fig 8)
3) You are now set up for drilling function.
Fig 5
Fig 6
Fig 7
Fig 8
PDH130B ERB015SDS-M-070611.indd 11
2007-6-13 15:46:26
