21
20
• Keep the blade (13) sharp to ensure a good cutting performance. Replace a worn or
damaged cutting device with a new one of the same type or have it sharpened by a
qualified specialist.
• Loosen the hex bolt (14) anti-clockwise using a suitable wrench and remove it together with
the blade (13) (Fig. K).
• Attach a blade (13) with a same type onto the spindle, pay attention to correct alignment.
Insert the hex bolt (14) on the spindle. Tighten the hex bolt clockwise with 60 N.m max
torque to ensure safe operation of your product (Fig. L).
• Replace this blade after 50 hours mowing or 2 years whichever is sooner regardless of
condition. If the cutting device is cracked or damaged, you must immediately replace it with
a new one.
MAINTENANCE
Your power tool requires no additional lubrication or maintenance.
There are no user serviceable parts in your power tool.
Before and after each use, check the product and accessories (or attachments) for wear
and damage. If required, exchange them for new ones as described in this instruction
manual. Observe the technical requirements.
TRANSPORTATION
WARNING!
Always carry the product by its main handle.
Never use the cord for carrying the product.
• Switch the product off and remove the safety key and battery packs.
• Protect the product from any heavy impact or strong vibrations which may occur during
transportation in vehicles.
• Secure the product to prevent it from slipping or falling over.
STORAGE
• Switch the product off and remove the safety key and battery packs.
• Clean the product as described above.
• Store the product and its accessories in a dark, dry, frost-free, well-ventilated place.
• Always store the product in a place that is inaccessible to children. The ideal storage
temperature is between 10 °C and 30 °C.
• We recommend using the original package for storage or covering the product with a
suitable cloth or enclosure to protect it against dust.
• Do not store it next to corrosive materials, such as fertilizer or rock salt.
• Do not cover the lawn mower with a solid plastic sheet. Plastic coverings trap moisture
around the mower, which causes rust and corrosion.
• The mower can be stored in a compact way by adjust the upper handle bar to the storage
position (Fig. M).
RECYCLING AND DISPOSAL
Waste electrical products should not be disposed of with household waste.
Please recycle where facilities exist. Check with your Local Authority or retailer
for recycling advice.
DISPOSAL OF AN EXHAUSTED BATTERY PACK
To preserve natural resources, please recycle or dispose of the battery pack
properly. This battery pack contains Li-Ion batteries. Consult your local waste
authority for information regarding available recycling and/or disposal options.
Discharge your battery pack by operating your tool, then remove the battery
pack from the tool housing and cover the battery pack connections with heavy-
duty adhesive tape to prevent short circuit and energy discharge. Do not
attempt to open or remove any of the components.
