background image

23

22

RATING LABEL EXPLANATION
EHT18-Li  = MODEL NUMBER

= ERBAUER

HT 

= HEDGE TRIMMER

18

 = 18 V d.c.

Li 

= LITHIUM ION

02

 

SYMBOLS

On the product, the rating label and within these instructions you will find among others 

the following symbols and abbreviations. Familiarize yourself with them to reduce 

hazards like personal injuries and damage to property.

V~

Volt, (alternating voltage)

Volt, (direct current voltage)

W

Walt

mA

Milliampere

A

Ampere

/min

per minute

mm

Millimetre

kg

Kilogram

dB(A) Decibel (A-rated)

m/s

2

Metres per seccond aquared

Caution / Warning. 

Read the instruction manual.

Wear protective gloves.

Wear protective footwear.

Wear hearing protection.

Wear eye protection.  

Wear respiratory protection.

Do not expose to rain or wet 

conditions.

Switch the product off and remove 

the battery pack to disconnect 

from the power supply before 

assembly, cleaning, adjustments, 

maintenance, storage and 

transportation.

Objects thrown by the product could 

hit the user or other bystanders.
Always ensure that other people 

and pets remain at a safe distance 

from the product when it is in 

operation. In general, children must 

not come near the area where the 

product is.

Keep fingers away from moving 

cutting device!

The product complies with the 

applicable European directives and 

an evaluation method of conformity 

for these directives was done.

Guaranteed sound power level

WEEE symbol. Waste electrical 

products should not be disposed 

of with household waste. Please 

recycle where facilities exist. 

Check with your Local Authority or 

local store for recycling advice.

yyWxx

Manufacturing date code: Year of 

manufacturing (20yy) and week of 

manufacturing (Wxx)

Summary of Contents for EHT18-Li















Reviews: