17
16
SEE TECHNICAL SPECIFICATIONS IN THE INSTRUCTION
MANUAL FOR THE VIBRATION LEVELS OF YOUR TOOL.
The declared vibration emission value should be used as a minimum
level and should be used with the current guidance on vibration.
Calculating the actual period of use can be difficult and the HSE
website has further information.
While working with this power tool, hand/arm vibrations occur.
Adopt the
correct working practices in order to reduce the
exposure to vibration. This tool may cause hand-arm vibration
syndrome if its use is not adequately managed.
Helping to minimise your vibration exposure risk. ALWAYS use sharp
chisels, drills and blades. Maintain this tool in accordance with
these instructions and keep well lubricated (where appropriate).
Avoid using tools in temperatures of 10ºC or less. Plan your work
schedule to spread any high vibration tool use across a number of days.
NOTE:
The use of other tools will reduce the users’ total
working period on this tool.
HEALTH SURVEILLANCE
All employees should be part of an employer’s health surveillance
scheme to help identity any vibration related diseases at an early
stage, prevent disease progression and help employees stay in
work.
RESIDUAL RISKS
Even if you are operating this product in accordance with all
the safety requirements, potential risks of injury and damage
remain. The following dangers can arise in connection with
the structure and design of this product:
1. Injuries and damage to property due to broken attachments or
the sudden impact of hidden objects during use.
2. Danger of injury and property damage caused by flying objects
or poor power tool
accessories.
PRODUCT DESCRIPTION
1. Cutting depth scale
2. Cutting depth adjustment knob
3. Dust/Chip extraction guide switch
4. Lock-off button
5. On/off switch
6. Handle
7. Battery pack release button
8. Power bar button
9. Battery pack (not included)
10. Dust extraction outlets (×2)
11. Mounting thread (parallel guide )
12. V-groove
13. Front plate
14. Roller
15. Blade
16. Back plate
17. Blade protection foot
18. Wing screw (x2)
19. Rebate depth gauge
20. Dust bag
21. Parallel guide
22. Wrench
23. Hex screws
24. Grub screws
25. Cutter block
26. Hex key
01
TECHNICAL SPECIFICATIONS
Planer
Rated voltage:
18V d.c.
Rated no load speed:
14000/min
Planing width:
82 mm
Cutting depth:
0-2mm
Rebating depth:
0-8mm
Weight(without battery):
2.3 kg
For use with battery pack and charger as below:
Battery pack model:
EBAT18-Li-2 / EBAT18-Li-4 / EBAT18-Li-5
Charger model:
EC18-Li / EFC18-Li / EMC18-Li
Ambient temperature range for tool and battery use: -10
o
C to 40
o
C
NOISE DATA
A weighted sound pressure:
L
pA
=82.5dB(A)
A weighted sound power:
L
wA
=93.5dB(A)
Uncertainty:
K
PA
& K
WA
=3.0dB(A)
The noise for the operator may exceed 80 dB(A) and ear protection measures are
necessary.
