Erbauer EAG2200, Original Instructions Manual

Page: 25 / 36

25
USE
01 INTENDED USE
The machine is intended for cutting and grinding metal and stone materials without using
water. For cutting, a special safety guard for cutting (accessory) must be used.
WARNING!
Always switch the product off and disconnect it from power
supply before making any adjustments!
02 OPERATION
OPERATING INSTRUCTIONS
• Clamp the workpiece if it does not remain stationary due to its own weight.
• Do not strain the machine so heavily that it comes to a standstill.
• Grinding and cutting wheels become very hot while working; do not touch until
they have cooled.
• Pull the plug from the socket-outlet when not using the machine. With the plug
inserted and mains voltage applied, the power tool still has low power consumption
even when it is switched off. (D)
ROTATING THE HANDLE (E1, E2)
NOTE:
The main handle (4) can be rotated to the left or right. It must be
“locked” into one of the three preset positions: central, 90°to the left or 90°to
the right.
WARNING!
For your safety, main handle (4) can’t be rotated when the
ON/OFF switch (5) is on.
It must not be used at any position in between these three preset positions
as it might rotate during use and create a hazard.
Press and hold the rotary handle lock button (3), and turn the main handle (4) to your
desired position.