Installation Instructions of Cable Reel
Rear screen
Reel
Thumb screw
Figure 4
Figure 5
1. Take out of the cable reel pieces reel (2 pcs) and thumb screw (2 pcs) out of the packing box.
2. Put the machine on a relatively flat table, Insert the strips of the cable reel metal pieces in the vertical
notches and overlap each hole with those of the rear screen. Then fasten the pieces with thumb screw,
as shown in Figure 4.
Note:
If screwing is not smooth, unscrew and start again to fit with the thread.
3. The assembled cable reel is shown in Figure 5.
WARNING: This product must only be operated in an upright position.
40°
WARNING: The cable can’t be enwinded on the reel during heater is in running, it
should be fully unraveled before using the heater.
EN
Use
27
213978_s1_s1_5059340130361_ERBAUER_A5_IM_MULTI_V03.indd 27
213978_s1_s1_5059340130361_ERBAUER_A5_IM_MULTI_V03.indd 27
03-05-2021 14:08:17
03-05-2021 14:08:17
