Erbauer 5059340124438, Original Instructions Manual

Page: 12 / 23

22
Side discharge attachment installation
1. Lift and hold the lock buckle (16a) upwards to unlock the side deflector guard (16)
(Fig. 7).
2. Open the side deflector guard (16) and hold it in the open position (Fig. 7).
3. Hook the side discharge attachment (25) underneath the rods. Release the side
deflector guard (16) (Fig. 8).
Use
Intended use
This petrol lawnmower ELMP170SP51 is designated with a power output of 3.1 kW.
1. The product is intended for mowing grass in domestic gardens only. It must not be
used to mow unusually high, dry or wet grass (e.g. pasture grass) or for shredding
leaves.
2. For safety reasons it is essential to read the entire instruction manual before the
first operation and to observe all the instructions therein.
3. This product is intended for private domestic use only, not for any commercial use.
It must not be used for any purposes other than those described.
Before you start
01 Protection
02
Fuel and engine oil
This product is equipped with a 4-stroke engine. Before operation, it is necessary to
add suitable fuel and engine oil separately.
23
WARNING! This product contains a separate operator’s manual for the
engine. Service the engine with proper petrol and engine oil as instructed
in the separate engine operator’s manual (32).
It is important to read and understand these instructions of the engine
and the equipment.
SAVE THESE ORIGINAL INSTRUCTIONS FOR FUTURE REFERENCE
.
WARNING! Fuel and oil are highly inflammable! Fumes will explode if
lit! Ensure that there are no naked flames around the product! Do not
smoke while filling fuel and oil!.
> Use proper funnels. Avoid spilling and overfilling the tanks.
> Always dispose of fuel, used oil and objects contaminated with them in accordance
with local regulations.
Fuel
NOTE : Take care of small parts that are removed during assembly or
when making adjustments. Keep them secure to avoid loss.
> Always use clean, fresh unleaded petrol. Purchase fuel in quantities that can be
used up within 30 days.
> Avoid getting dirt, dust or water in the fuel tank.
1. Place the product on a stable, level surface. We recommend laying a non-flammable
sheet under the product.
2. Unscrew and remove the fuel tank cap (11) (Fig. 9).
3. Add suitable fuel into the fuel tank. Leave a minimum 5 mm of space between the
top of the fuel and the inside edge of the tank to allow for expansion (Fig. 10).
4. Wipe any spilt fuel with a soft cloth and reattach the fuel tank cap (11).