17
GENERAL SAFETY WARNINGS FOR BATTERIES
a)
CAUTION:
Danger of explosion if batteries are
incorrectly replaced. Replace only with the same or
equivalent type. Observe correct polarity.
b) Batteries (battery pack or batteries installed) shall not
be exposed to excessive heat such as sunshine, fire or
the like. Protect from mechanical shock. Keep dry and
clean. Keep away from children.
c) Do not open, dismantle, shred or short-circuit batteries.
Do not mix old and new batteries.
d) Dispose of properly. Pay attention to environmental
aspects of battery disposal. Do not dispose of in
household waste.
e) Refer to safety and other instructions on the battery or
its packaging.
f) In case of battery leakage, remove the batteries and
clean the battery compartment thoroughly. Avoid
contact with skin and eyes.
ADDITIONAL SAFETY WARNINGS FOR MINI
CIRCULAR SAW
a) Only use saw/diamond blade of the size that is specified
in this instruction manual.
b) Make sure that the correct saw/diamond blade is
applied for the material to be cut. Read and compare
the information in this instruction manual with the
product information of the saw/diamond blade.
c) Use only blades that are marked with a speed equal or
higher than the speed marked on the tool.
d) The power tool shall not be wet or applied in wet
environment.
e) The voltage of the power source must agree with the
voltage specified on the rating label of the machine.
f) Check the product, its power cord and plug as well as
accessories for damage before each use. Do not use
the product if it is damaged or shows wear.
650W Mini circular saw_MNL_EMCS650_TPS_GB_V02_V20518_20180604.indd 17
6/4/18 09:20
