24
WARNING!
The product must be fully assembled before operation!
Do not use a product that is only partly assembled or assembled with
damaged parts!
Wear protective gloves for this assembly work and always lay the product
on a flat and stable surface while assembling.
Follow the assembly instructions step-by-step and use the pictures
provided as a visual guide to easily assemble the product!
Do not connect the product to power supply before it is completely
assembled!
WARNING!
The product and the packaging are not children’s toys!
Children must not play with plastic bags, sheets and small parts! There is
a danger of choking and suffocation!
02
Cutting discs (Fig. A, B, C, D, E, F, G, H)
WARNING!
Please only use segmented diamond cutting discs which
are intended for dry cutting of concrete, masonry and paving. Observe
the technical specifications of this product and the diamond cutting discs
when purchasing and using new cutting discs!
Attachments are sharp and hot after use! Handle them with care! Wear
safety gloves when handling attachments to avoid injuries like burns
and cuts!
The rotation direction arrow on the cutting disc (13) should comply with
the one on fixed guard (9)!
Follow the following steps for attaching and replacing cutting discs which are also
applicable for changing the cutting width:
1. Loosen the depth clamping knob (7) anti-clockwise. (Fig. A step 1)
1500 W Wall chaser_MNL_EWC1500_DFT_Erbauer_GB_V20518_20180706.indd 24
7/6/18 4:05 PM
Summary of Contents for 3663602795292
Page 35: ......
