19
AUXILIARY HANDLE (B)
Slide the handle onto the hammer and rotate to the desired working position. To clamp
the auxiliary handle, rotate the handle clockwise. To loosen the auxiliary handle, rotate
the handle anti-clockwise.
WARNING!
Always use the auxiliary handle.
DEPTH STOP (C)
• Depress the quick clamp (10) then insert the depth stop (3) through the hole. Make sure the
rippled part is on the bottom side.
• Align the tip of the depth stop (3) with the drill tip. Now pull the depth stop (3) back by the
required drilling depth.
• Release the quick clamp (10) to lock the depth stop (3) in position.
CONNECTION TO POWER SUPPLY
• Make sure the on/off switch (7) is in its off position.
• Connect the plug to a suitable socket.
WARNING!
Check the voltage! The voltage must comply with the
information on the rating label!
• Your product is now ready to be used.
