Solar Siren x 1
Pet Friendly PIR Motion Sensor x 1
Door/Window Magnetic Sensor x 1
Remote Control x 1
All Batteries and Fixings
Instructions
Kit Contents
Read the instructions thoroughly.
Remove the contents from their packaging.
Consider the most appropriate positioning.
Avoid mounting the Sensor near to metal objects
or electrical wiring.
Before Installation
Two Lens PIR: pet tolerant to 25 kgs.
Vertical and horizontal detection range 8m/110
°.
Automatic temperature compensation and anti-air
turbulence technology/control: automatically adapts
to environmental changes, thereby saving energy.
1. PIR Motion Sensor
Appearance
1 . Detection window
2. Status indicator
1
2
5
3. Test button
4. Bracket slot
5. Self-adhesive pad
fixing markers
Flashes every 2 seconds:
self-testing state
Flashes twice:
self-t
esting is finished, ent
ers working
mode
Flashes once:
movement is detected
Flashes once every 3 seconds:
low battery indication
(immediate battery change required).
LED Indication
Tamper
switch
Zone
setting
Infrared
sensor
Status
indicator
Infrared Sensor:
Detects movement and triggers an
alarm signal when the system is armed.
Tamper Switch:
If the casing is opened when in
'working state', the tamper switch will be triggered
and generate an alarm signal.
PCB Layout
1.
Remove the activation strip. Fit the retaining screw
supplied.
2.
Self-testing will commence for 1 minute as
indicat
ed by the LED flashing ev
ery 2 seconds.
3.
To enter Test Mode press the Test Button at the
back o
f the PIR. The LED will then flash once
when movement is detected, for up to 3 minutes.
Test Button
Test Mode
a.
b.
c.
d.
1.
To test in Working Mode, walk in front of the Sensor
- the LED should illuminatee once when movement
is detected.
2.
If the Sensor is triggered twice in 3 minutes it will
enter into power saving (sleep mode). If no
movement is detected within the next 3 minutes,
the Sensor will return to normal working mode.
1.
Avoid mounting the Sensor in areas where draughts
may be present or where the temperature may
fluctuat
e greatly, such as near to: windows, air
conditioning, heating, refrigeration units, cooking
appliances and direct sunlight.
2.
Where possible, mount the Sensor in the corner of
the room so that the logical path of an intruder
would cut across the fan detection pattern.
A PIR responds more effectively to movement
across the device than to movement directly
towards it.
3.
Fit the Sensor in a position that will cover your
desired protection area:
a.
Fix the bracket t
o the wall with the fixings kit
supplied. For optimum performance set the
height of the bracket to 2 metres above
ground level.
b.
Adjust angle of the PIR Sensor to cover the
required detection area.
Working Mode
Installation
2-2.2m
Ground
To perform a walk test. Press
the test button once and
walk from left to right in the
room. The LED indicator will
flash once when motion is
detected.
Specification
Power Supply
2 x DC 1.5V AA Batteries
Static Current
≤
50uA
Alarm Current
≤ 9.5mA
Detection Area
8m/110°
Transmitting Distance
≤ 80m (in open ar
ea)
Pet Immunity
≤ 25k
g
Radio Frequency
433 MHz
Housing Material
ABS Plastic
Operating Temperature -10°C~55°C
Relative Humidity
≤ 80% (non-condensing)
PIR Sensor Dimensions
(L x W x D)
Bracket Dimensions
(L x W x D)
100 x 59 x 43 mm
52 x 30 x 26.5 mm
The Door/Window Sensor comprises of a transmitter and a
magnet. The Sensor can be mounted on doors, windows
and any other objects that can be opened or closed. When
the transmitter and magnet are separated by more than
2cm, the Sensor will send a signal to the Control Panel to
trigger an Alarm.
Appearance
2. Door/Window Sensor
Transmitter
Magnet
Status Indicator
Flashes once:
door/window opened, transmitter sends the
signal to the Control Panel/Siren
Flashes every 3 seconds:
low battery indication (immediate
battery change required)
LED Indication