ERA Home Security Ltd.
Valiant Way, Wolverhampton,
West Midlands, WV9 5GB.
Email: [email protected]
Web: www.eraprotect.com
9. SPECIFICATION
CUSTOMER HELPLINE
0345 257 2500
Alarm Decibel:
Static Current:
Alarm Current:
Emitting Distance:
Frequency:
Battery:
Battery Life:
IP Rating:
Housing Material:
Size (LxWxH):
104dB
≤1mA
≤300mA
200m (in the open air)
868MHZ
Battery DC 3.6V (2 x ER34615
Lithium Batteries)
4 years
IP55
ABS Plastic
250 x 242.7 x 64mm
7. BATTERY
REPLACEMENT
When the panel receives the low battery report from the
siren, please change the battery.
1.
Go into the Alarm Settings and switch Accessory
Tamper switch off.
Go to the location of the Siren and remove the cover
screw using a screwdriver.
Remove the front cover, then proceed to remove the
battery cover.
Unplug the battery connectors and remove from the
battery compartment.
Replace with new recommended batteries and plug
them into the Siren.
Apply the battery cover to the backplate and then
replace the front cover back to the backplate.
Go back into Alarm settings and switch Accessory
Tamper Switch back on.
3.
4.
Take the backplate of the Siren, three screws, wall
plugs and a screwdriver to the location.
5.
Push the wall plugs into the holes and proceed to
screw the backplate onto the wall using the
screws provided.
6.
Remove the battery cover and attach the connectors.
9.
Screw the cover screw at the bottom of the Siren
lens with a screwdriver to fix the cover to the
backplate.
4.
5.
6.
7.
2.
Note:
Battery is required to be connected before use.
3.
Remove the front cover.
7.
Place the battery cover onto the backplate and screw
it securely.
Align the front cover to the backplate, hang and
slide down.
8.