Page 12
SETTING UP YOUR INDOOR CAMERA
Power on the camera.
Wait for the camera to boot up, and then the status LED to pulse
three times.
Go to the ERA Protect app, and select Add new from the Camera
dashboard.
Select the ERA Protect Indoor Camera.
Follow the steps to connect the camera to your Wi-Fi network.
If the Wi-Fi set up fails, then you will need to put the camera into
Pair mode. Please follow the steps below to do this:
Using reset pin, press the reset button for 5 seconds. The reset button
is located on the underneath of the camera.
The camera will start booting up.
You can continue with the set up, once the status led starts pulsing
three times.
1
2
3
1
2
3
4
5