ERA miGuard A105, Instruction Manual

Page: 55 / 68

When used as an Accessory Kit
The A105 can be used to extend any miGuard Alarm System (with Control Panel).
When used as an accessory the A105 Control Unit is referred to as an Internal
Siren.
Pairing the Internal Siren to a miGuard Control Panel:
Press the connect button on the Internal Siren - the Internal Siren will beep once,
3 seconds later it will beep once again and the strobe will flash indicating that the
internal siren is in learn mode, ready for pairing.
Press the or button on the Internal Siren, it will beep once to
indicate successful pairing.
Exit Pairing Status
Press the connect button on the Internal Siren, it will beep once indicating that it
is no longer in pairing status.
Test Internal Siren Pairing Status
Press the button on the Remote Control. If the Internal Siren and Control
Panel both beep once, pairing was successful. If not, follow the above steps again.
28