ERA Invincible, Instruction Manual

Page: 11 / 62

2
1
Getting Started
Plug the AC Adapter output connector into the AC Adapter Jack in the Control Panel.
Plug the AC adapter into a wall outlet.
Switch the ON/OFF switch to ‘ON’
Upon alarm activation the dual network Control Panel will auto dial out to the pre-
stored phone numbers via PSTN landline, or if unavailable for any reason will
automatically switch-over to dialling out to the stored numbers via the GSM network.
Connect the smaller connector of telephone cable supplied to the
PSTN land line socket at the back of the panel.
Connect the other end of the telephone cable to the signal output
provided by PSTN land line operator.
1
2
Connect PSTN Landline
Note: The built-in
rechargeable battery
should be used only in
the case of AC power
failure.
1.
2
3..
1.
2.
05
Note: If the Control Panel isn't
connected to the landline, when in
an alarm condition, it will dial out to
the pre-stored phone numbers via
the GSM network.
The GPRS network is not available
until the Control Panel stops calling
all numbers.