IMPORTANT:
Add-on sensors are not available.
•
Your sensor may be set to channel 1, 2 or 3 to avoid conflict with a
nearby sensor.
•
The channel indicator on the station will tell what channel is receiving
a sensor signal.
•
Press an release the CH button on the station to select the channel
receiving the sensor signal.
•
If you see the word AUTO, press and release the CH button until the
channel number shows alone.
•
When the word AUTO is showing, the station will scroll through all 3
channels and show dashes for the two channels that do not have
sensors connected.
Channel Indicator and Auto Scroll
308-1513-INT www.equitybylacrosse.com/support Page | 8
