12:08
Equity 301111 I/M_r• (A4 size) • 11/4/2014 • AT
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
TIME SET BUTTON
HOUR SET BUTTON
MINUTE SET BUTTON
ALARM SET/OFF BUTTON
SLEEP BUTTON
VOLUME/BUZZ SWITCH
AM/FM BAND SELECTOR
TUNING KNOB
SNOOZE BUTTON
RED LED DISPLAY
BATTERY COMPARTMENT
AUTO/OFF/ON SWITCH
4. Sleep Set Button: Press this button to display the
number of minutes (1 minute to 1 hour and 59
minutes) where the radio will sound and
automatically turn off after the requested time has
expired.
5. HOUR and MINUTE BUTTON: Use these buttons
to set the time, set the alarm, and set the Sleep
function.
6. AM/FM BAND SELECTOR: Slide the selector to
either AM or FM to select the desired radio band.
7. VOLUME CONTROL KNOB: To regulate the
loudness of the radio, rotate the Volume Control
Knob clockwise to the desired position. If you wish
to be awakened by the “BUZZER” rotate the control
counter-clockwise until a “click” sound is heard.
8. TUNING KNOB: Turn this knob to the desired radio
station.
9. SNOOZE BUTTON: When you are awakened by the
music or buzzer but wish to sleep a few more
minutes, simply touch the “SNOOZE” button and it
will shut off the music or buzzer for 7-10 minutes
before the music or buzzer sounds again. This can be
repeated several times.
TO SET THE TIME
1. Press the time set button together with the HOUR or
MINUTE button to set the correct time.
Note:
Repeat the above steps if you run past the correct
time. A red dot appears in the lower left hand corner of the
display indicating that the time shown is PM time.
TO SET THE ALARM
1. Press the Alarm set button to check the alarm time
2. Press the Alarm set button together with the HOUR
or MINUTE button to adjust the alarm time paying
close attention to the PM indicator.
Note:
A red dot appears in the lower left hand corner of
the display indicating that the time shown is PM time.
TO PLAY THE RADIO
1. Slide the AUTO/OFF/ON switch to the “ON”
position.
2. Slide AM/FM band switch to desired band.
3. Select the desired radio station by turning the tuning
knob
4. Adjust the Volume to the desired listening level.
TO WAKE TO RADIO
1. Set the alarm as previously instructed.
2. Turn the radio on and select the desired radio station
and volume setting as previously instructed.
3. Slide the AUTO/OFF/ON Switch to the “AUTO”
position. Your clock is now set to turn on the radio
automatically at the preselected alarm time.
POWER SOURCE
Plug the AC cord into an AC 120V/60Hz power
outlet. The unit is now working and the display will
blink to show you it is operating, but not yet set.
OPERATING INSTRUCTIONS
1. AUTO/OFF/ON/SWITCH: Slide the switch to
turn the radio “ON”, “OFF” or to “AUTO”
position. When the switch is in the “AUTO”
position, it will permit automatic turning “ON”
and “OFF” according to the sleep and alarm
settings.
2. TIME SET BUTTON: Press this button
simultaneously with the HOUR or MINUTE
button to set the desired time.
3. ALARM SET BUTTON: Press this button
simultaneously with the HOUR or MINUTE
button to set the desired wake up time.
TO WAKE TO BUZZER
1. Follow steps 1 through 3 under “TO WAKE TO
RADIO”.
2. Rotate the VOLUME/BUZZ switch to the “BUZZ”
position. You will be awakened at the pre-selected
alarm time by the buzzer tone. To turn the BUZZER
off, slide the AUTO/OFF/ON switch to the “OFF”
position or press ALARM SET/OFF button.
TO TURN THE ALARM OFF
To turn the alarm off so that it sounds again the next day,
press the ALARM/SET/OFF button. To turn the alarm
off so that it does not sound the next day, slide the
AUTO/OFF/ON switch to the “OFF” position.
SLEEP CONTROL
1. Turn the AUTO/OFF/ON switch to the “AUTO” or
“OFF” position
2. Press the SLEEP button to display the sleep time.
The display will indicate 59 minutes. If you wish the
radio to play for a shorter period of time, simply
press the SLEEP button together with the MINUTE
button to set the desired time period, or if you wish
the radio to play longer, press the SLEEP button
along with the HOUR button to play for up to 1 hour
and 59 minutes (MAX).
3. Press the SLEEP button. The radio will turn on
automatically and will turn itself off when the pre-set
time has passed.
NOTE:
The maximum sleep time is 1 hour 59 minutes.
The radio will be switched off automatically when the sleep
time expires. To turn the radio off before expiration of the
sleep time, simply press the SNOOZE button.
BATTERY BACKUP
Your clock has a battery backup feature in case of power
failure. A 9 volt battery (not included) is required. You
must put in a battery to ensure the battery backup
feature is ready in case of power failure. If power fails,
the backup battery will automatically continue operation
of the clock and maintain actual time. However the
display will not be lit. During actual power failure the
alarm function will not be operational. When electrical
power is restored, the display will light up again and
alarm time set previously is restored. The battery will
maintain timekeeping for approximately 8 hours during
power failure or interruption.
Note:
Remove the battery if the clock is to be unplugged
for a long period of time to avoid unnecessary battery
drain.
SPECIFICATIONS
Power Source : AC 120V/60Hz
Radio Band Frequency : AM 530-1700 KHz,
FM 88-108 MHz
Clock Display : 0.6” LED Display
Battery Backup : 1 “9V” Battery
297x210mm