CARE AND MAINTENANCE
Battery Requirements: 1 AA (IEC LR6) required in
movement (Alkaline recommended) (not included)
Battery life: over 12 months
SPECIFICATIONS
POWER UP
1. Insert 1 fresh AA battery into your clock according to
the polarity markings.
2. Turn the Time Set Knob counter clockwise to set your time.
POSITION
• Place your clock on your night stand, desk or counter top.
Page | 2
Page | 3
TIME ALARM
1. Turn the Alarm Set Knob counter clockwise to set the
alarm time.
2. Move the Alarm ON/OFF switch to ON to activate your
alarm. Move the Alarm ON/OFF switch to OFF to deactivate
your alarm.
When the alarm sounds it will increase in volume and
frequency for 30 seconds and remain at that volume until the
alarm is snoozed or turned off.
SNOOZE AND LIGHT
•
Four minute snooze:
When the alarm sounds, press the
button on top of the clock. Snooze may be repeated.
•
Light:
Press the button on top of the clock.
ON
OFF
Snooze/Light
Alarm ON/OFF
Alarm Set Knob
Time Set Knob
Battery
Battery replacement instruction:
When batteries of different brand or type are used together, or new and old
batteries are used together, some batteries may be over-discharged due to a
difference of voltage or capacity. This can result in venting, leakage, and rupture
and may cause personal injury.
• Always purchase the correct size and grade of battery most suitable for the
intended use.
• Always replace the whole set of batteries at one time, taking care not to mix old
and new ones, or batteries of different types.
• Clean the battery contacts and those of the device prior to battery installation.
• Ensure the batteries are installed correctly with regard to polarity (+ and -).
• Remove batteries from product during periods of non-use. Battery leakage can
cause corrosion and damage to this product.
• Remove used batteries promptly.
• For recycling and disposal of batteries, and to protect the environment please
check the internet or your local phone directory for local recycling centers and/
or follow local government regulations.
