For more information, consult the user manual available in www.equitel.es
Installation guide
Configuration through web server:
By default, the devices are configured to acquire its IP by DHCP. If your network
has an DHCP server, it will assign a valid IP to the device about 40 seconds after
power the device.
If there is no DHCP server or is not accessible, after approximately 3 minutes, the
device will configure itself with these access parameters:
IP:
192.168.1.1
Subnet mask:
255.255.255.0
Gateway:
192.168.1.254
There are three methods to know the IP address of the device:
Connect to headphones to the connector (
6
) and momentarily press the “
IP/RD
”
button. The device will say its IP address though the headphones.
Using the free “
EQUITEL Devices Searcher
” application to locate the Equitel
devices on an Ethernet network.
Using the free “
ENALite
” application to access the device
For more detailed information about audio decoders and mixers configuration, please consult the “Technical Manual” in our web
site:
www.ena.equitel.es
Sample application of this family of devices usage:
EQUIPOS DE TELECOMUNICACIÓN OPTOELECTRÓNICOS, S.A.
Polígono de Malpica, calle F Oeste, G. Quejido nave 74
50057 ZARAGOZA (ESPAÑA)
Tel. +34 976 570 353 - Fax. +34 976 571 383
E
NA
eg
01
Assembly:
Stand-alone box:
DIN rail
Metal
spring
Metal
spring
DIN rail
*
Optional DIN rail adapter can be supply by EQUITEL
DIN rail:
Devices are shipped with following credentials by
default:
User:
admin
Password:
admin
E411, E413, E415:
Decoders can receive
selected channels (i.e. “streams”) from
the networks and convert it back to an
analog audio signal.
E417:
Mixer besides the same features
than decoders, include the option to use
audio coming from files stored in a USB
memory or analog signals in its MIC or
LINE inputs.
The selection of the actual stream, local
file or analog signal to be sent to the
output is made based on a powerful but
very easy to configure priority schema.
