Care and maintenance
•
Avoid knocks and impacts against glass cook top. The glass is very strong, but it is not
unbreakable.
•
Avoid friction of cookware on the cook top, which could scratch glass and wear off
screen-printing on the surface.
•
Do not use cookware with rough or uneven bases, which may scratch the vitroceramic
glass.
•
Place your cookware in the center of the hob for proper operation.
•
Do not leave empty cookware on the cooking zone with the unit in operation, as this
could cause the cookware to overheat and warp.
•
Do not heat an unopened can of food as it may burst.
•
If using very little liquid in cookware with a non-stick coating, such as Teflon, do not
preheat on very high power.
•
The maximum power level should only be used for boiling.
•
Metal objects, such as cutlery, cooking utensils or even jewelry should not be placed on
the appliance, as they can get very hot, very quickly.
•
Physical damage, misuse or abuses to the appliance are not covered under the
warranty.
WARNING: Disconnect (unplug) electrical power cord before cleaning
Cleaning is very important in maintaining a safe and well working machine. The metal filter,
located under your appliance, protects your appliance from dust and grease, and should be
cleaned at least once a week. It can be cleaned in a sink using soap and water, or put into
the dishwasher. Use a cloth or sponge dampened slightly with a soap and water mixture to
clean all exterior stainless steel surfaces and glass. Use a clean lint-free cloth to remove the
excess water. Make sure no water enters the unit through ventilation holes. A glass scraper
can be used on the cook top for stubborn stains. Glass cook top cleaner is also widely
available, and can be used on the glass only to aid in cleaning.
DO NOT
use an abrasive sponge
DO NOT wash the induction machine under running water
DO NOT spray the exterior housing with any liquid
DO NOT allow water to drip into the housing or onto electrical components
You should inspect all parts on a regular basis to ensure that all is in proper working order. If a
part is damaged, have the unit repaired by the manufacturer
prior to returning the unit to
operation. If you need any further assistance, please consult our website at
