INTRODUCTION
The
SODIR
models CT-540 and CT-3000 Conveyer Toaster/Ovens are designed to
offer quality food warming and toasting. They are constructed of food service quality
stainless steel for commercial applications. The CT-540 can be used in pass-though
configuration, or front-loading and unloading. It has a 12” wide by 1-3/4 inch throat
opening. Its controls feature top-only, bottom-only or all elements ‘on’ configurations.
The CT-3000 is a 12 inch wide pass-though model, with adjustable inlet and outlet
throat height from 1-1/4 to 3-1/2 inches. Its controls are installed in a remote box,
attached by a cord, which allows for right or left side, or even wall mounting, and
provide full power or half power of all elements, along with conveyer speed
adjustment. Both Toaster/Ovens feature infrared quartz elements, and adjustable
conveyer speed for perfect toasting of varied products such as bread, bagels,
sandwiches, pizzas or anything else that requires warming or toasting. The green
indicator lamp illuminates to show the unit is plugged in. The orange indicator lamp
illuminates to show the elements are on and heating.
Specifications:
Model
Electrical Plug
Configuration
CT-540
208/240V, 1 PH, 3KW, 11/13A
NEMA-6-20P
CT-3000
208/240V, 1 PH, 3.4KW, 12/14A
NEMA-6-20P
INSTALLATION
The
SODIR
Conveyer Toaster/Ovens need to be connected to a grounded outlet of
proper voltage of 208/240V. DO NOT place the unit in a damp area or near steam
sources. When positioning the Toaster, make sure that the ventilation holes are not
blocked. Maintain 4” clearance at each side, rear and top of the toaster. DO NOT
PLACE THE EQUIPMENT DIRECTLY OVER OPEN FLAMES.
