The Induction cooker is designed for countertop installation. Alternatively, you may cut
a hole in the countertop underneath the unit of suitable size to support the flange of the
unit, thereby accomplishing a semi-recessed installation. When doing so, maintain 6”
clearance underneath the unit. It is important to have positive air flow in the cabinet
when using the semi-recessed installation method.
La cuisson par induction doit être connecté à une prise de terre de tension correcte de
208/240V, monophasé, 50/60 Hz. NE placez PAS l'appareil dans un endroit humide ou
à proximité de vapeur sources, ou où la chaleur provenant d'autres appareils peut avoir
une incidence sur l'unité, en augmentant sa température interne. Lors du
positionnement de l'appareil, assurez-vous que le bas orifices de ventilation ne sont pas
obstrués. Maintenir 2" de dégagement de chaque côté, à l'arrière et le dessus de
l'appareil.
ASSEMBLY
The Induction Cooker comes from the factory completely assembled. It may be
shipped with plastic exterior protective film, all of which must be removed before
operation. DO NOT operate the appliance prior to removing the protective film
completely.
NE PAS faire fonctionner l'appareil avant de retirer le film de protection
complètement.
OPERATION