Manual_
Page 3
www.equip-info.net
3. Operation
1. Switch On:
Please press the power button (PW) at left side of the housing (LED will light
green).Power sources: Please use 3 x AAA size batteries or DC Adapter 5V/500mA
(not included).
2. Connecting USB devices:
Please connect the device you like to copy from to the SOURCE port first.
(Green LED is blinking in detecting status).
3. Now, please connect the device you like to store the copy to the TARGET port.
When both LEDs lights green (not blinking) the OTG bridge is ready for copying.
4. Select the file format. There are five options:
ALL files or MP3, JPG, DOC and MPG files only.
5. File transmission:
Please press the COPY button to start copy process. Note: The available storage
capacity of the TARGET device must be bigger than that of the SOURCE device.
a. Transmitting process:
The two LEDs, Source and Target, are alternately blinking green.
b. Transmitting done:
Both LEDs are blinking green simultaneously.
6. Error message:
Any of the three LEDs (POWER, SOURCES and TARGET) is blinking in red color.
a. Device capacity fault::
The available storage capacity of the Target device is smaller than that of the Source
device (Target LED lights red).
b. Power Deficiency/ Low Power:
Power LED lights red.
c. Crash:
Press RESET button (next to TARGET port) to reboot
7. Power save modus:
The OTG bridge automatically switches off after 30 second idle/free condition.
