this product at the same time. Please conduct following 2 steps to shun
interference
：
(1) Click the ID Link button on USB receiver and its red LED will light up and
enter into
20-second
ID link stand-by time.
Note
If pressing again the ID
Link button during 20-second stand-by time, ID link action will be
discontinued.
(2) Within the 20-second stand-by time, press
and
simultaneously until
the red LED of USB receiver becomes blinking for 3 times, the ID link has
been successfully done.
Trouble shooting
Question
Possible cause
How to resolve
Need to install software for first
use of this product?
No need
Need to link ID before first use?
No need
Possible to use 2 or more of
this product in a room at the
same time?
Yes, but please implement ID Link in
advance to avoid interference (see “
ID
Link
” for how to link)
Possible to use one presenter
with 2 or more USB receivers?
Yes but only when the presenter and
USB receivers are not conducted ID Link
Laser pointer malfunction
1. Continued pressing of the
laser button over 30 second
2. Battery power is running
out
1. Press the laser button again
2. Replace with new batteries
Remote control malfunction
1. Continued pressing of the
function button over 30
seconds
2. Interfered by other RF
signal
1. Press the function button again
2. To Implement ID Link (see “
ID
Link
” for how to link)
Laser pointer and remote
control both malfunction
Batteries are inserted in
wrong direction or battery
power run out
Check the insert direction of batteries and
battery power
Specifications
(
Note
Design and specifications are subject to change without notice.)
Frequency range : 2400~2483MHz
Remote range : Approx. 160 feet (50 meters) line of sight
Operating voltage : 2.4V~3.2V
Power consumption: Normal operation < 10mA; Red laser operation < 30mA ; Sleep < 10uA
Power : AAA battery x 2
Output power : Under 1mW
Size : Presenter – 115 (L) x 38 (W) x 25 (H) mm ; USB receiver - 33.6 (L) x 16 (W) x 3.5 (H) mm
Weight : Approx. 33 grams (include USB receiver and Red laser)
Operating temperature : 0°C (32°F) ~ 60°C (140°F)
Operating humidity (non-condensing) : 10%~85% RH
Red Laser : Semiconductor laser (λ= 650nm), Emission duration : Continuous
Laser output power : Max. 0.95mW
