Equinox Systems Lighting strike STRO21, User Manual

Page: 5 / 12

Operation:
DMX mode:
To access the DMX mode, press the “MODE” button to show “512” on the LED display. Now press the
“ENTER” button to set the DMX address from 001-512 using the “UP” and “DOWN” buttons. To select
the one of the four DMX channel modes, press the “ENTER” button and use the “UP” and “DOWN”
buttons to select 1, 4, 6 or 7 channel mode.
Confirm your setting by pressing the “ENTER” button.
Built-in programmes:
To access the built-in programme mode, press the “MODE” button to show “PR01” on the LED display.
Now to choose one of the three built-in programmes, press the “ENTER” button and use the “UP” and
“DOWN” buttons to scroll through PR01, PR02 and PR03. When you are on the desired programme,
press the “ENTER” button and use the “UP” and “DOWN” buttons set the desired speed
from FS/SP01 to FS/SP15.
In PR03 you can set the brightness of the LEDs once you have set the speed. Press the “ENTER” button
and use the “UP” and “DOWN” buttons set the desired brightness from C000-C255.
PR01 - Single flash strobe effect, FS01 - FS15
PR02 - Multiple flash strobe effect, FS01 - FS15
PR03 - 4 segment chase effect, SP01 - SP15, C000 - C255
Note FS01 = slow, FS15 = Fast, SP01 = Slow, SP15 - Fast, C000 = Off, C255 = Full On
Static wash mode
To access the DMX mode, press the “MODE” button to show “CoNS” on the LED display. Now press the
“ENTER”
button to set the brightness from C000 - C255 using the
UP”
and
“DOWN”
buttons.
Note C000 = Off, C255 = Full On
Sound active mode:
To access the sound mode, press the “MODE” button to show “SoU.1” on the LED display. Now use the
“UP” and “DOWN” buttons to scroll through the four sound mode options from “SoU.1 ” to “SoU.4” .
In “SoU.1” and “SoU.2” to change the sensitivity, press the “ENTER” button to set the sensitivity from
SU01 - SU31.
In “SoU.3” and “SoU.4” to change the sensitivity, press the “ENTER” button to set the sensitivity from
SU01 - SU31. Now press the “ENTER” button and use the “UP” and “DOWN” buttons to change the
brightness from C000 - C255.
SoU.1 - Single flash strobe effect
SoU.2 - 4 segment strobe chase effect
SoU.3 - 4 segment chase effect
SoU.4 - 4 segment strobe and chase effect
Note SU01 = low, SU31 = high, C000 = Off, C255 = Full On
Master/slave mode
To access the master/slave mode, press the “MODE” button to show “SLAv” on the LED display.
The unit will follow in sequence with the master unit set in any one of the above modes.
Equinox Lightning Strike Operations