www.prolight.co.uk
Kaleido
User Manual
5
Operating instructions
DMX mode:
Operating in a DMX control mode environment gives the user the greatest flexibility when it comes
to customising or creating a show. In this mode you will be able to control each individual trait of the
fixture and each fixture independently.
To access the DMX address mode, press the
“MENU”
button on the front of the unit to show
Addr
on the LED display. Now press the
“ENTER”
button and use the
“UP”
and
“DOWN”
buttons to set the
required DMX address. Press the
“ENTER”
button to confirm the setting.
To exit out of any of the above options, press the
“MENU”
button.
Auto mode:
To access the auto mode, press the
“MENU”
button on the front of the unit to show
Auto
on the
LED display. Now press the
“ENTER”
button and use the
“UP”
and
“DOWN”
buttons to choose one of the
3 auto modes. Press the
“ENTER”
button to confirm the setting.
To exit out of any of the above options, press the
“MENU”
button.
Sound active mode:
To access the sound active mode, press the
“MENU”
button on the front of the unit to show
Soun
on the LED display. Now press the
“ENTER”
button to confirm the setting, and use the sound sensitivity
knob to adjust the sound sensitivity.
To exit out of any of the above options, press the
“MENU”
button.
Master/slave mode:
To set the master unit, press the
“MENU”
button on the rear of the master unit to select your
desired program (sound active or auto).
To set the other units in slave mode, press the
“MENU”
button on the rear of the unit to show
SLav
on the LED display and press the
“ENTER”
button to confirm the setting. The units will now run in
sequence with the master unit.
To exit out of any of the above options, press the
“MENU”
button.
4 channel mode:
Channel
Value
Function
CH1
000-255
Master dimmer (0-100%)
CH2
000-249
Gobo pattern select
250-255
Constant gobo pattern change
CH3
000-255
Gobo rotation direction
CH4
000-255
Gobo rotation speed (fast-slow)
(This function will only work when
channel 3 is 0-9 or 250-255)