www.prolight.co.uk
Interceptor MKII
User Manual
5
Operating instructions
DMX mode:
Operating in a DMX control mode environment gives the user the greatest flexibility when it comes
to customising or creating a show. In this mode you will be able to control each individual trait of the
fixture and each fixture independently.
To access the DMX address mode, press the
“MENU”
button on the top of the unit to show
Addr
on the LED display. Now press the
“ENTER”
button and use the
“UP”
and
“DOWN”
buttons to set the
required DMX address. Press the
“ENTER”
button to confirm the setting.
To exit out of any of the above options, press the
“MENU”
button.
Master/slave mode:
To set the master unit, press the
“MENU”
button on the front of the master unit to show
SLNd
on the
LED display. Now press the
“ENTER”
button and use the
“UP”
and
“DOWN”
buttons to choose
Nast
.
Press the
“ENTER”
button to confirm the setting. Then select your desired program (sound active, DMX
or one of the built-in programs).
To set the other units in slave mode, press the
“MENU”
button on the front of the unit to show
SLNd
on the LED display. Now press the
“ENTER”
button and use the
“UP”
and
“DOWN”
buttons to choose
either
SL1
(Slave 1) or
SL2
(Slave 2). Press the
“ENTER”
button to confirm the setting. The unit will
now run in sequence with the master unit.
To exit out of any of the above options, press the
“MENU”
button.
Please ensure that all slave units are set to the same DMX channel mode as the master unit.
Sound active mode:
To access the sound active mode, press the
“MENU”
button on the front of the unit to show
SoUn
on the LED display. Now press the
“ENTER”
button and use the
“UP”
and
“DOWN”
buttons to set
the sound mode on or off. Press the
“ENTER”
button
to confirm the setting.
To adjust the sound sensitivity, press the
“MENU”
button on the front of the unit to show
Sens
on the LED display. Now press the
“ENTER”
button
and use the
“UP”
and
“DOWN”
buttons to set the
sound sensitivity
0
~
100
. Press the
“ENTER”
button to confirm the setting.
Value: 0 - 100 (0 = low sensitivity, 100 = high sen-
sitivity)
To exit out of any of the above options, press the
“MENU”
button.
6 channel mode:
Channel
Value
Function
CH1
000-007
Blackout
008-200
Dimmer (0-100%)
201-247
Strobe (slow-fast)
248-255
Sound active
CH2
000-255
Red (0-100%)
CH3
000-255
Green (0-100%)
CH4
000-255
Blue (0-100%)
CH5
000-255
White (0-100%)
CH6
000-255
Motor manual rotation (360°)
