You should find inside the Equinox carton the following items
:
1, Equinox Eyebar
2, Power cable
3, Instruction manual
Technical Specifications:
• DMX channels: 6
• Sound Active, Auto, DMX and Master/Slave modes
• 256 Ultra Bright 5mm LEDs (R: 64, G: 64, B: 64, W: 32, A: 32)
• Built-in programmes and microphone
• Power consumption: 21W
• Power supply: 240V
• Dimensions: 210 x 494 x 205mm
• Weight: 3.5Kgs
Operations:
DMX Mode
To select DMX mode, press the
“MODE”
button to show
“ADDR”
on the LED display. Now use
the
“UP”
and
“DOWN”
buttons to set the DMX address from 001-512. When you have finished
setting the desired DMX address press the
“ENTER”
button.
Auto Run Mode
To select auto run mode, press the
“MODE”
button to show
“AUTO”
on the LED display. Now use
the
“UP”
and
“DOWN”
buttons to choose from the two auto run options
“AUTO”
or
“AUT1”
.
“AUTO” Option 1
: With this option the unit will run through its built-in programmes when there is
no sound present and will automatically switch to sound when music is heard.
“AUT1” Option 2
: With this option the unit will constantly run through the built-in programmes
regardless of the presence of sound.
When you have selected the desired option press the
“ENTER”
button. The unit will now run
through its built-in programmes.
Sound Active Mode
To select sound active mode, press the
“MODE”
button to show
“SOUN”
on the LED display.
Now press the
“ENTER”
button and use the
“UP”
and
“DOWN”
buttons to set the sound active
mode
“ON”
or
“OFF”
. The unit will now react to the beat of the music.
Note:
When there is no music present the unit will automatically switch to auto run.
Slave Mode
To select the slave mode, press the
“MODE”
button to show
“SLND”
on the LED display.
Now press the
“ENTER”
button and use the
“UP”
and
“DOWN”
buttons to select either
“SLA1”
or
“SLA2”
.
“SLA1” option
: This is the normal slave mode, where the slave units all do the same thing.
“SLA2” option
: This is the inversion slave mode, where the slave unit will react in the opposite
direction from the master unit.
Note:
After making any changes to the above settings, please allow the Eyebar 5 seconds to
register the change.
Equinox Eyebar
Technical specifications
