www.prolight.co.uk
Verti Jet
User Manual
4
Operation:
Place the unit on a level surface with the output nozzle orientated for vertical (upwards) or horizontal
output. DO NOT install in a vertical (downwards) position or above any persons.
Always disconnect it from the mains supply before filling as fluid could be spilled.
Fluid replenishment:
Always fill the tank away from the unit to prevent fluid getting inside the main housing.
If fluid should get inside the main housing, disconnect the unit from the mains immediately
and consult a technician.
Remove the pipe from the tank by unscrewing the cap fully. Then unscrew the 2 spring-loaded hand
screws from the bracket securing tank and remove tank. Once out and away from unit, stand the tank
upright, then fill tank with fluid. Slide bottle back into the unit and replace the pipe by screwing the cap
back on tightly. Secure the tank by replacing the bracket and securing with the 2 spring-loaded hand
screws, making sure they are firmly in position.
Installation:
Install the unit in a well-ventilated area. Use in an insufficiently ventilated room can lead to the
condensation of the smoke fluid. The resulting slippery surface can cause accidents. Keep a minimum
distance of 1m around the unit.
Furthermore do not orientate the output aperture directly in the direction of the audience’s eyes.
In order to create the best effect, there should be a distance between the unit and the audience
of at least 3m.
Only install the smoke machine on fire resistant, scratch resistant and water resistant surfaces.
Operating instructions
Operating instructions
DANGER OF FIRE!
When installing the unit, make sure there is no highly flammable
material (decoration articles etc) within a minimum distance of 1m
DANGER TO LIFE!
Disconnect from the mains before starting maintenance
Only use quality smoke fluids recommended by your dealer. You must
not use substances which are classified as ‘DANGEROUS WORKING
MATERIALS’ or ‘FLAMMABLE FLUIDS’.